![background image](http://html.mh-extra.com/html/yakima/1033518/1033518_manual_893608003.webp)
OK
OK
1033518D-3/15
MAKE SURE THE CARRIERS SIT VERTICALLY ON THE BARS.
In some cases, the bracket and
the bail may not be parallel.
If the bolts seem
too short, use
the longer bolts
included in this kit.
(longer bolts)
Adjust foam pads to support
boat at contact points.
LOAD THE BOAT, AND TIE IT DOWN.
• Loop strap around hoop of HullRaiser.
• Bring straps up and over boat so that they
hang in front of the boat.
• Slide buckle up so that it hangs at top edge of boat.
• Thread end of strap around tower or crossbar.
Press open buckle and
insert end of strap.
• To tighten straps,
hold and pull.
• Secure the loose
ends.
SECURE STRAPS.
TIGHTEN THE
KNOBS.
BOLTS MUST NOT EXTEND ABOVE
THE KNOBS.
If bolts extend above the knob,
you must use the shorter bolts.
Note: Some lacquer hull
finishes may stick to pads.
Protect with soft cloth.