Yaesu VX-8GR Operating Manual Download Page 92

Page: 92 / 168

VX-8GR O

PERATING

ANUAL

ENERAL

The

VX-8GR

provides a message feature, which sends a message (up to 16 characters)

instead of sending a voice. 20 different messages can be programmed, any one of them
can be selected and transmitted with your ID.

Note

The Message Feature requires that all members (1) use the Yaesu

VX-8GR

VX-8DR

VX-8R

VX-3R

, or

FTM-10R/SR

transceiver, (2) store the same

messages into the message slots, (3) store the same member list into the mem-
ber box, and (4) set the same frequency.

Does not send the Message through a repeater.

ROGRAMMING

ESSAGE

(Requires all members set the same messages into the same message slots in the same
order.)

The

VX-8GR

has 20 message slots, including a factory-programmed message (EMER-

GENCY). The factory-programmed message of course can be overwritten at any time
with personalized messages.

Press and hold the

key for one second to enter the Set Mode.

Rotate the

DIAL

knob to select Set Mode Item

54: MES-

SAGE SELECT

Press the

key briefly to enable adjustment of this Set

Mode Item.

Rotate the

DIAL

knob to select the desired Message slot

into which you wish to store a message. The LCD displays
the previously stored message.

Press the

key briefly to enable programming of the

message.

Press and hold in the

key for one second to clear the

previously stored message, if desired.

Rotate the

DIAL

knob or press the keyboard to set the first

character of the message you wish to store.

Example 1

: Rotate the

DIAL

knob to select any of the 61

available characters.

Example 2

: Press the

key repeatedly to toggle among

the four available characters associated with that
key:

.....

Press the

key to move on to the next character, if

needed.

ESSAGE

EATURE

Summary of Contents for VX-8GR









































































































































































Search results

Summary of Contents for VX-8GR

Reviews:

Related manuals for VX-8GR

Brands by name

Popular brands

Yaesu VX-8GR, Operating Manual

Search results

Summary of Contents for VX-8GR

Reviews:

Related manuals for VX-8GR

Brands by name

Popular brands