VX-8GR O
PERATING
M
ANUAL
106
The
VX-8GR
provides another CW learning feature; call it a CW Training feature, which
sends random Morse Code via the sidetone (heard in the speaker), so you can improve
your CW proficiency.
1.
Press and hold the
m
key for one second to enter the Set Mode.
2.
Rotate the
DIAL
knob to select Set Mode Item
19:
CW TRAINING
.
3.
Press the
m
key briefly to enable adjustment of
this Set Mode Item.
4.
Rotate the
DIAL
knob to select the Training mode (displayed
in fine print at the upper edge of the LCD):
ALPHA 5CHR
:
Sends five Alphabet characters only
ALPHA REPT
:
Sends Alphabet characters only (Repeatedly)
NUMBER 5CHR
: Sends five Numeric characters only
NUMBER REPT
: Sends Numeric characters only (Repeatedly)
MIX 5CHR
:
Sends five Alphabet, Numeric, “?”, and “/” characters (Mixed)
MIX REPT
:
Sends Alphabet, Numeric, “?”, and “/” characters (Mixed, Con-
tinuously in groups of five)
5.
Press the
b
key to change the cursor to “
SPED
”, then
rotate the
DIAL
knob to select the Morse speed. You may
select the units of the code speed between “
CPM
(charac-
ters per minute)” and “
WPM
(Words per minute)” by the
DIAL
knob from Set Item “
FORM
”.
6.
Press the
b
key to change the cursor to “
PTCH
”, then
rotate the
DIAL
knob to adjust the CW sidetone pitch (400
- 1000 Hz, 50 Hz/step).
7.
Press the
b
key to change the cursor to “
LED
”, then ro-
tate the
DIAL
knob to switch the flashing of the (white)
LED light “on” and “off”.
8.
Press the
a
/
b
key to change the cursor to “
MODE
.
9.
Press the
f
key to begin generation of the code characters
(CW sidetone only, the radio does not transmit); the gener-
ated characters will appear at the right of the “
CHR
” item.
10. You may adjust the CW sidetone audio level by rotating the
DIAL
knob while pressing and holding the
g
key.
11. If one of the “
5CHR
” modes is selected in step 4 above, press the
f
key to send
another code group.
12. To stop CW generation, press the
f
key again.
13. To disable CW training feature, press the
PTT
switch.
The “CPM” selection is based on the international “PARIS” standard, which
stipulates five characters per word.
CW T
RAINING
F
EATURE
Summary of Contents for VX-8GR
Page 71: ...VX 8GR OPERATING MANUAL 69 NOTE ...
Page 125: ...VX 8GR OPERATING MANUAL 123 NOTE ...
Page 165: ...VX 8GR OPERATING MANUAL 163 NOTE ...
Page 166: ...VX 8GR OPERATING MANUAL 164 NOTE ...