Yaesu VX-5R Operating Manual Download Page 59

Page: 59 / 76

VX-5R O

PERATING

ANUAL

OWER

-O

ISPLAY

ODE

When the

VX-5R

is turned off, the LCD may be set up to display one or more environmen-

tal measurements. These include temperature, barometric pressure, altitude, or combina-
tions of these.

•

Press the

[F/W]

key, then press the

[BAND(SET)AR]

key to activate the Set mode.

‚

Rotate the

DIAL

to select Menu #45 (“

DISP MODE

”).

Press the

[BAND(SET)AR]

key momentarily to enable modification of this Menu

item.

„

Rotate the

DIAL

to select the new setting. The options include

NONE

No display when the transceiver is off.

TEMP

Display of temperature when the transceiver is off.

BARO

Display of barometric pressure when the transceiver is off.
(requires optional

SU-1

). A bar graph will indicate relative

changes in the pressure (two bars per hour).

ALTI

Display of the current altitude when the transceiver is off.
(requires optional

SU-1

)

TEMP + BARO

: Display of temperature plus barometric pressure.

TEMP + ALTI

Display of temperature plus altitude.

ALL

Display of temperature plus barometric pressure plus altitude.

…

When you have made your selection, press the

PTT

key to save the new setting and

exit to normal operation.

If any of the above settings is enabled (i.e. any setting except “NONE”), cur-
rent drain with the

VX-5R

turned off will be about 20 mA. We recommend

that the Power-Off Display Mode be set to “NONE” if you plan to be away

from the radio for an extended period of time.

ISPLAY

ONTRAST

The LCD’s contrast may be adjusted using the Menu, as well.

•

Press the

[F/W]

key, then press the

[BAND(SET)AR]

key to activate the Set mode.

‚

Rotate the

DIAL

to select Menu #41 (“

CONTRAST

”).

Press the

[BAND(SET)AR]

key momentarily to enable modification of this Menu

item.

„

Rotate the

DIAL

to adjust the contrast. As you make the adjustment, you will be able

to see the effects of your changes.

…

When you have completed the adjustment, press the

PTT

key to save the new setting

and exit to normal operation.

Display Customization

Summary of Contents for VX-5R













































































Search results

Summary of Contents for VX-5R

Reviews:

Related manuals for VX-5R

Brands by name

Popular brands

Yaesu VX-5R, Operating Manual

Search results

Summary of Contents for VX-5R

Reviews:

Related manuals for VX-5R

Brands by name

Popular brands