VX-127 O
PERATING
M
ANUAL
58
Activating the DTMF Pager
1.
Press the [
SET
(
)
EMG
] key momentarily to enter the Set mode.
2.
Rotate the
DIAL
knob to select Set Mode Item 55:
PAGER
.
3.
Press the [
F
] key momentarily to enable adjustment of this Set
Mode Item.
4.
Rotate the
DIAL
knob to select “
ON
.”
5.
Press the
PTT
switch to save the new setting and activate the
DTMF Pager.
When the DTMF Pager is activated, the “
P
” notation will re-
place the “100 MHz” digit of the frequency display.
6.
Press the
PTT
switch to send the 3-digit DTMF pager code which
is stored in the last-selected DTMF Pager Memory register.
7.
When you receive a DTMF paging call, it will open your radio’s
DTMF squelch, and the LCD will display the 3-digit DTMF
pager code which was received. After five seconds, the DTMF
pager will revert to its squelched mode.
8.
To disable the DTMF Pager, just repeat the above procedure, rotating the
DIAL
knob
to select “
OFF
” in step 4 above.
During DTMF Pager operation, you may set up the
VX-127
such that a ringing “Bell”
sound alerts you to the fact that a call is coming in, as described previously. See page 27 of
the Operating Manual for details.
DTMF P
AGER
O
PERATION
(
R
EQUIRES
O
PTIONAL
FTD-7
)
Summary of Contents for VX-127
Page 37: ...VX 127 OPERATING MANUAL 35 NOTE...
Page 47: ...VX 127 OPERATING MANUAL 45 NOTE...
Page 58: ...VX 127 OPERATING MANUAL 56 NOTE...
