Yaesu VX-127, Operating Manual

Page: 53 / 88

VX-127 O
PERATING
M
ANUAL
51
I
NTERNET
C
ONNECTION FEATURE
You may access other Internet Link Systems (including WIRES™ in the “FRG” mode)
that use a DTMF string for access.
1. Load the DTMF tones which you wish to use for Internet-link access into a DTMF Autodial
memory register. For purposes of this example, we will use “#123” as the access code.
A. Press the [
SET
( )
EMG
] key momentarily to enter the Set mode.
B. Rotate the DIAL knob to select Set Mode Item 17: DT WRT .
C. Press the [ F
] key to enable adjustment of this Set Mode Item.
D. Rotate the DIAL knob to select the DTMF Memory register
(“
d1
” ~ “
d9
”) into which you wish to store the access code.
E. Press the [
F
] key momentarily. The first digit will blink.
F. Rotate the
DIAL
knob to select “
F
” (representing DTMF
“#”: the first digit of the DTMF string).
G. Press the [
F
] key momentarily to accept the first digit and
move to the second digit of the DTMF string.
H. Repeat the previous steps until you have completed the ac-
cess code (“#(F)123”).
I. Press and hold in the [ F
] key for one second to save the setting.
2. Press the
PTT
switch to exit to normal operation.
3. Press the [ SET
( )
EMG
] key momentarily to enter the Set mode
again.
4. Rotate the DIAL knob to select Set Mode Item 24: INT MR .
5. Press the [ F
] key to enable adjustment of this Set Mode Item.
6. Rotate the DIAL knob to select the DTMF access number (“
d
1
” ~ “
d 9
”) corresponding to the Internet link repeater to which
you wish to establish an Internet link, then press the [ F
] key
momentarily to lock in the selected access number.
7. Rotate the
DIAL
knob to select Set Mode Item 22:
I NET
.
8. Press the [
F
] key to enable adjustment of this Set Mode Item.
9. Rotate the
DIAL
knob to set this Set Mode Item to “
INT.MEM
”
(thus activating the “Other Internet Link System” mode).
10. Press the
PTT
switch momentarily to save the new settings and
exit to normal operation.
11. The “ ” icon will appear in the upper right corner of the dis-
play (thus activate the Internet Connection feature).
12. Once the Internet Connection feature is activated per step 9 above,
you may now press the [ SET
( )
EMG
] key, while you are trans-
mitting, to send out the selected DTMF string (to establish the
link to the desired Internet-link mode).
13. To disable the Internet Connection feature, press the [ F
] key, then press the
[
SET
( )
EMG
] key (the “
” icon will disappear from the display).
To return to the WIRES™ mode, repeat steps 3 - 6 above, selecting “
INT.COD
” in step 9.