9
• Change the frequency step
1. Right-click on the digit from 100kHz to 1Hz of the frequency to display the setting screen for the FAST
step and TUNING step.
2. Click on the desired FAST step or TUNING step.
(2) Change the frequency on the spectrum scope screen
1. Move the mouse cursor to the display area of the spectrum scope and turn the mouse wheel to change the
frequency in the set “
TUNING
” step.
• In the Spectrum Scope screen, press and hold the [
SHIFT
] key on the keyboard and turn the mouse
wheel to increase or decrease the frequency in the set FAST steps.
• When you click on the point you want to receive such as the peak of the signal on the spectrum scope
screen, the frequency jumps to the vicinity. You can then turn the mouse wheel to fine tune the frequency
and hear the desired signal.
Click
: It becomes the clicked frequency
Wheel
: Frequency goes up / down in TUNING steps
Shift + Wheel
: Frequency goes up / down in FAST steps
Right click
: Display the FAST/TUNING step setting screen
(3) Enter the frequency on the numeric keypad screen
1. Right-click on the MHz digit of the frequency to display the numeric keypad screen.
