15
z
VOX GAIN
VOX gain setting
z
VOX DELAY
The “Hang-Time” of the VOX system (the transmit-receive delay after the cessation of speech) may also
be adjusted.
z
ANTI VOX
The Anti-Trip setting sets the negative feedback of receiver audio to the microphone, to prevent receiver
audio from activating the transmitter
z
MEM CH
Selects the memory channel in memory mode.
Click:
Select memory channels in sequence.
Wheel:
Select a memory channel.
z
GROUP
Click:
When the memory group function is ON, memory groups are selected in sequence.
Wheel:
Selects the memory group when the memory group function is ON.
Right click:
Select ON / OFF of the memory group function.
z
R.FIL
Select the bandwidth of the roofing filter. The bandwidth of the roofing filter that can be selected depends
on the communication mode.
z
RPT
Select the shift direction when operating through a repeater.
SIMP:
Both transmit and receive have the same frequency.
+ (plus):
Both transmit and receive have the same frequency. frequency (default setting is + 100kHz).
- (minus):
Transmit is at a lower frequency than the receive frequency (default setting is -100kHz).
