REAR PANEL
( 1) 4
30 MHz UNIT and ANTENNA JACK
When the optional 430 MHz unit i s in stalled, the
430 MHz antenna should be connected here. An
N-type connector is utilized, for improved U HF
performance.
(2) 144
MHz UNIT and ANTENNA JACK
The 1 44 MHz unit i s built in, and the 2 meter
antenna should be in stalled here.
(3) 50 MHz UNIT and ANTENNA JACK
When the optional 50 MHz unit 1s in stalled, the
50 MHz antenna should be connected to this jack.
(4)
POWER cord
This is the connection to the AC po wer line.
(5) GND
For be st performance, and protection from
dangerous electrical shock, a good earth gro und
should be connected here, u sing a short, heavy,
braided cable.
(6) RF IN
This jack should be connected to the FT-901 DM
RF O UT j ack, using the supplied Cable A. Do
NOT connect thi s jack to the FT-901 DM ANT
jack.
(7) ACC
This jack should be connected to the FT-901 DM
ACC jack, u sing the supplied Cable C.
(8)
HF ANT
The HF antenna should be connected to thi s jack.
(9) OUTPUT
This jack should be connected to the FT-901 DM
ANT jack, u sing the supplied cable
B.
(10) EXT RCV
When an external receiver i s u sed, it s antenna jack
should be connected to this terminal. The
connection will be made when the FUNCTION
switch is set to EXT RCV. (Connection cable not
supplied)
- 5 -
