manualshive.com logo in svg

Yaesu FTM-500DR, Instruction Manual, Page: 8 / 32

Share
Download
Yaesu FTM-500DR Instruction Manual Download Page 8

8

Connecting in digital mode

•  Ascertain the DG-ID setting of the WIRES-X node station. Connecting to the 

WIRES-X node requires the transceiver DG-ID be set according to the DG-ID code 

set on the WIRES-X node station.

•  Confirm that the operating mode of WIRES-X node has been set to the C4FM digital 

mode.

•  Before using WIRES-X, set the communication modulation mode to C4FM.

Connecting to a WIRES-X digital node

1.  Set the transmit/receive DG-ID to the same ID number as the node station.

For details, refer to the FTM-500DR/DE Operating Manual.

The DG-ID number set by this connection method is the normal DG-ID number set by 

pressing and holding the [

GM

] key. Please note that this is not the WIRES-X DG-ID number 

set in [

68 WIRES DG-ID

] in the setup menu.

2.  Transmit with the corresponding node transmit/receive frequency.

•   If the signal is received from the node, continue to operate as is.

•   If not receiving the signal from the node, it is possible that the node station is not 

connected to the Internet, if so, proceed to the next step “Connecting to the other 

node ID or the other room ID”.

 

„

Connecting to the other node ID or the other room ID

1.  Press and hold the 

FUNC

 knob 

 [

68 WIRES DG-ID

] 

 Press the 

FUNC

 knob.

The WIRES-X DG-ID setting screen will be displayed.

2.  Rotate the 

FUNC

 knob to set the WIRES-X DG-ID to 

the same ID number as the node station.

AUTO:  Only open nodes, set to the DG-ID number 

“00” may be connected.

01 to 99:  Only nodes matching the set DG-ID number 

may be connected.

The default setting is “AUTO”

AUTO

65

66
67

68

SEARCH SETUP

EDIT CATEGORYTAG >
DELETE ROOM/NODE >
WIRES DG-ID

WIRES-X

3.  Press the 

DIAL

 knob, 

SUB DIAL

 knob or 

PTT

 switch to save the setting and return 

to normal operation.

4.  Set the A-band to the frequency of the desired local node.

• WIRES-X can only be used on the A-band.

• If the B-band is the operation band, press and hold the [D X] key to automatically switch 

the operation to the A-band (shown on the top part of the screen).

5.  Press and hold the [

D X

] key.

“

X

” flashes on the left side of the display.

• While 

“

X

”

 is flashing, briefly press the [

D X

] key to re-

establish connection to the local node.

• When a local node cannot be found, 

“

X

”

 will 

disappear in 20 seconds.

Summary of Contents for FTM-500DR

































Reviews:

No comments