Yaesu FTM-500DR, Instruction Manual, Page: 11 / 32

11
z
Searching by node or room name
1. While displaying the local node, rotate the FUNC knob
to select [ SEARCH & DIRECT ], then press the FUNC
knob.
The category list is displayed.
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
2. Rotate the FUNC knob to select [ SEARCH & DIRECT ],
then press the FUNC knob.
The character input screen is displayed.
ALL
SEARCH & DIRECT
C1:
– – – – – – – – – – – – – – – –
C2:
– – – – – – – – – – – – – – – –
C3:
– – – – – – – – – – – – – – – –
C4:
– – – – – – – – – – – – – – – –
CATEGORY
3. Enter all or part of the room or node name, then press
and hold the FUNC knob.
– – – – – – – – – – – – – – – –
If connection destinations with the first part of the name matching the partial entry
are found, they will be listed.
• If there are no connection destinations matching the partial entry, “No Data” ap-
pears and the screen returns to the character input screen.
• If the entered name is found, the transceiver establishes connection immediately.
• The screen displays the room list search results followed by the node list search
results.
• On the room search results, the number of nodes connected to each room ap-
pears on the right side.
4. Rotate the FUNC knob to select the node or room to
connect, then press the FUNC knob.
• Rotate the FUNC to select the node or room to con-
nect, then press PTT to initiate a connection.
• Once connection is successfully established, the
menu list of the connected node (room) will appear.
JA1YOE-TKY-ROOM 42
JA1YOE-ROOM-A 31
JA1YOE-ROOM-B 16
JA1YOE-ROOM-C 1
JA1YOE-ND1
JA1YOE-TKY
"JA1Y"

24
• If connection is unsuccessful, an error message appears and the screen returns to
the list of nodes and rooms.