23
FTM-3100R/E Advance Manual
Setup (Menu) Mode
The FTM-3100R/E Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [
MHz
(
SETUP
)] key for
one second to enter the Setup menu.
2. Rotate the
DIAL
knob to select the Menu
Item to be adjusted.
3. Press the [
MHz
(
SETUP
)] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the
DIAL
knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the [
MHz
(
SETUP
)] key
for one second to exit the Setup menu and
resume normal operation.
VOL
DIAL
D W
M W
SETUP
REV
SQL
TXPO
V / M
M H z
Menu Item
Function
Available Values
Default
1: APO
Enables/Disables the Automatic Power
Off feature.
0.5H to 12H (0.5H step)/
OFF
OFF
2: BCLO
Enables/Disables the Busy Channel
Lock-Out feature.
ON/OFF
OFF
3: BEP KEY
Enables/Disables the key beeper.
KEY+SCAN/KEY/OFF
KEY+SCAN
4: BEP EDGE
Enables/Disable the Band-edge beeper
while scanning.
ON/OFF
OFF
5: BELL
Selects the CTCSS/DCS/EPCS Bell
Ringer repetitions.
1 to 20/CONTINUE/OFF
OFF
6: CLK TYPE
Shifting of the CPU clock frequency.
A/B
A
7: DC VOLT
Indicates the DC Supply Voltage.
---
---
8: DCS CODE
Setting of the DCS code.
104 standard DCS
codes
023
9: DCS INV
Select a combination of DCS inversion
codes in terms of communication direc-
tion.
N O R M A L / I N V E R T /
BOTH
NORMAL
10: DT AUTO
Enables/Disables the DTMF Autodialer
feature.
MANUAL/AUTO
MANUAL
11: DT DELAY
Setting of the DTMF Autodialer TX Delay
Time.
50/250/450/750/1000
450 MS
12: DT SET
Loading of the DTMF Autodialer Memo-
ries.
---
---
13: DT SPEED
Setting of the DTMF Autodialer Sending
Speed.
50/100
50 MS
14: DW RVRT
Enables/Disables the “Priority Channel
Revert” feature.
ON/OFF
OFF
