Yaesu FTA-750 Spirit Operating Manual Download Page 26

Page: 26 / 92

FTA-750/FTA-550 O

perATing

AnuAl

Operation Modes

The

FTA-750/FTA-550

op-

erate in either of the modes

below. You can switch the

modes via the

screen

displayed by pressing the

[

MENU

] key on the front

panel.

FTA-750

FTA-550

When turning on the

FTA-750/FTA-550

, the last mode

you have used before turning off will automatically be

entered.



COMM

The basic operating mode for communication. Navi-

gation through the NAV band is also performed on

this mode.



(MEMORY)

This mode provides you with the ability to store and

recall as many as 200 channels in the radio’s main

memory bank.



(WEATHER)

The receive mode for the VHF weather chan-

nel broadcasts. 10 weather channels are pre-pro-

grammed at the factory.



GPS

(FTA-750 only)

The position information and status of the GPS sat-

ellites according to the signals received by the built-

in GPS unit are displayed during this mode.



NAVI

(FTA-750 only)

Navigation to the waypoint (destination) memorized

or manually input is carried out in this mode.



SETUP

This mode allows certain aspects of your radio’s

configuration to be customized for your personal

operating conditions.

asIc

peratIon

Summary of Contents for FTA-750 Spirit





























































































Search results

Summary of Contents for FTA-750 Spirit

Reviews:

Related manuals for FTA-750 Spirit

Brands by name

Popular brands

Yaesu FTA-750 Spirit, Operating Manual

Search results

Summary of Contents for FTA-750 Spirit

Reviews:

Related manuals for FTA-750 Spirit

Brands by name

Popular brands