Yaesu FTA-750 Spirit Operating Manual Download Page 20

Page: 20 / 92

FTA-750/FTA-550 O

perATing

AnuAl

asIc

peratIon

Reception (COM Band)

Turning the radio on and off



To turn the radio on

p r e s s a n d h o l d t h e

POWER

switch.

“

WARNING

” will be

displayed.

PTT

SQL

This device can only

be used as an aid to

navigation for VFR.

All information

is presented for

reference only.

You assume total

responsibility and

risk associated with

using this device.

WARNING

I agree



If you agree with the

warning message, press

the [

ENT

] key.



A channel frequency will

appear on the display. If

not, press the [

COMM

]

key.



The “

BUSY

” icon appears on the display when the

audio signal is received on the current frequency.

127.300

VOL

BUSY



To turn the radio off

, press and hold the

POWER

switch.

Summary of Contents for FTA-750 Spirit





























































































Search results

Summary of Contents for FTA-750 Spirit

Reviews:

Related manuals for FTA-750 Spirit

Brands by name

Popular brands

Yaesu FTA-750 Spirit, Operating Manual

Search results

Summary of Contents for FTA-750 Spirit

Reviews:

Related manuals for FTA-750 Spirit

Brands by name

Popular brands