Yaesu FT DX 1200, Operation Manual

Page: 100 / 140

Page 98
FT
DX
1200 O
PERATING
M
ANUAL
M
EMORY
O
PERATION
M
EMORY
G
ROUPS
0 emory channels may be arranged into as many as six convenient groups, for easy identi ¿ cation and selection. For ex-
ample, you might want to designate memory groups for $0 BC stations, short-wave broadcast stations, contest fre T uen-
cies, repeater fre T uencies and 30 S limits, or any other groupings you like.
( ach memory group is capable of holding up to 0 memory channels except 0 emory Group 01 it is 1 memory chan-
nels, and the Group si ] e is ¿ xed). When a memory channel is grouped, the channel numbers change to correspond to the
chart below
Memory Group Assignment
1. 3 ress the [ MENU
] button to enter the
0 enu mode.
. 5 otate the [ VFO-B/CLAR
] knob
or press the S T
button) to select 0 enu item “
042 MEM GROUP
”.
3. 3 ress the [ SELECT ] button, then rotate the [ VFO-
B/CLAR
] knob
or press the S T button) to set this
0 enu item to “
ENABLE
” the default setting is “
DIS-
ABLE
”).
4. 3 ress the [ SELECT
] button, then press the [
MENU
]
button to save the new setting and exit. 2 peration
will now be restricted to the six 0 emory Groups.
To cancel 0 emory Group operation, repeat steps 1)
through 4) above, choosing “
DISABLE
” in step 3).
A
DVICE
:
To avoid confusion, note that the 30 S memory group
and the 30 S memories “ 3 -1L” through “ 3 - U” will be
so designated.
G
ROUP
M
EMORY
“OFF ”
01 ~ 19
20 ~ 39
40 ~ 59
60 ~ 79
80 ~ 99
P-1L/1U ~ P-9L/9U
5M-01 ~ 5M-10
M
EMORY
C
HANNEL
N
UMBER
G
ROUP
M
EMORY
“ON ”
1-01 ~ 1-19
2-01 ~ 2-20
3-01 ~ 3-20
4-01 ~ 4-20
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
US-1 ~ US-5
Choosing the Desired Memory Group
You may recall memories just within a particular 0 emory Group, if desired.
1. 3 ress the [ V/M
] button, if necessary, to enter the
“ 0 emory” mode.
. 3 ress and hold in the [ MCH/GRP
] button for one
second located to the Lower right of the [
VFO-B/
CLAR
] knob). The “
GRP ” icon will appear on the
display.
3. 5 otate the [ VFO-B/CLAR
] knob to select the de-
sired 0 emory Group.
4. 3 ress the [ MCH/GRP
] button. The “
MCH ” icon will
appear on the display.
. 5 otate the [ VFO-B/CLAR
] knob to select the de-
sired 0 emory Channel within the Selected 0 emory
Group.
A
DVICE
:
If no channels have been assigned to a particular 0 emo-
ry Group, you will not have access to that Group.
[V/M] Button
[VFO-B(RX)] Button
[MCH/GRP] Button
[VFO-B/CLAR] Knob
[VFO-B/CLAR] Knob [MENU] Button
[SELECT] Button