57
Menu Operation
Menu Item 22 [CW WEIGHT]
Function
: Set the Dot:Dash ratio for the built-in electronic keyer.
Available Values
: 1:2.5 ~ 1:4.5
Default
: 1:3.0
Menu Item 23 [DCS CODE]
Function
: Setting the DCS code.
Available Values
: 104 Standard DCS codes
Default
: 023
DCS Code
023 025 026 031 032 036 043 047 051 053 054 065 071 072 073
074
114
115
116
122 125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244 245 246 251 252 255
261 263 265 266 271 274 306
311
315 325 331 332 343 346 351
356 364 365 371
411
412 413 423 431 432 445 446 452 454 455
462 464 465 466 503 506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731 732 734 743 754
-
Menu Item 24 [DIG DISP]
Function
: Define the displayed frequency
offset during DIG (USER-L or USER-U)
mode operation.
Available Values
: –3000 ~ +3000 Hz
Default
: 0 Hz
Menu Item 25 [DIG MIC]
Function
: Adjust the audio input level from terminal equipment (such as a TNC or PSK-31
sound card) during DIG (Digital) mode operation.
Available Values
: 0 ~ 100
Default
: 50
Menu Item 26 [DIG MODE]
Function
: Select the mode and sideband (if applicable) in the DIG (Digital) mode.
Available Values
: RTTY/PSK31-L/PSK31-U/USER-L/USER-U
Default
: RTTY
RTTY: AFSK RTTY operation on the LSB mode
PSK31-L: PSK-31 operation on the LSB mode
PSK31-U: PSK-31 operation on the USB mode
USER-L: User-programmed costume operation based on LSB mode
USER-U: User-programmed costume operation based on USB mode
In the USER-L and USER-U modes, you can define the display frequency offset and
carrier frequency offset by menu Items #24 (DIG DISP) and #27 (DIG SHIFT).
