53
Menu Operation
Menu Item
Function
Available Values
Default
20 CW PITCH
Setting of the pitch of the CW sidetone, BFO offset, and
CW filter center frequencies
300 ~ 1000 Hz
700 Hz
21 CW SPEED
Set the sending speed for the built-in Electronic keyer
4 wpm ~ 60 wpm/
20 cpm ~ 300 cpm
12 wpm
(60 cpm)
22 CW WEIGHT
Set the Dot:Dash ratio for the built-in electronic keyer
1:2.5 ~ 1:4.5
1:3.0
23 DCS CODE
Setting the DCS code
104 Std DCS codes
023
24 DIG DISP
Define the displayed frequency offset during DIG
(USER-L or USER-U) mode operation
-3000 ~ +3000 Hz
0 Hz
25 DIG MIC
Adjust the audio input level from terminal equipment
(such as a TNC or PSK-31 sound card) during DIG
(Digital) mode operation
0 ~ 100
50
26 DIG MODE
Select the mode and sideband (if applicable) in the DIG
(Digital) mode
RTTY/
PSK31-L/PSK31-U/
USER-L/USER-U
RTTY
27 DIG SHIFT
Define the carrier frequency offset during DIG (USER-L
or USER-U) mode operation
-3000 ~ +3000 Hz
0 Hz
28 EMERGENCY Enable Tx/Rx operation on the Alaska Emergency
Channel, 5167.5 kHz (USA Version only)
OFF/ON
OFF
29 FM MIC
Adjust the microphone gain level for the FM mode
0 ~ 100
50
30 FM STEP
Select the tuning steps for the
knob on the FM
mode
5/6.25/10/12.5/15/
20/25/50 kHz
2
31 ID
Store your callsign into the CW identifier
–
YAESU
32 LOCK MODE
Select the operation of the front panel’s
key
DIAL/FREQ/PANEL
DIAL
33 MAIN STEP
Setting of the
’s tuning speed
FINE/COARSE
FINE
34 MEM GROUP Enable/disable the memory grouping feature
OFF/ON
OFF
35 MEM TAG
Store Alpha-Numeric “Tags” for the memory channels
–
–
36 MIC KEY
Enable/disable CW keying by the microphone’s [UP]/
[DWN] keys
OFF/ON
OFF
37 MIC SCAN
Enable/disable scanning access
OFF/ON
ON
38 OP FILTER
Enable the optional filter (CW or SSB)
OFF/SSB/CW
OFF
39 PKT MIC
Adjust the audio input level from the TNC during 1200
bps Packet operation
0 ~ 100
50
40 PKT RATE
Set the transceiver’s circuitry for the Packet baud rate
1200/9600 bps
1200 bps
41 RESUME
Set the delay time for scanning resumption
OFF/3/5/10 seconds
5 sec
42 RPT SHIFT
Set the magnitude of the Repeater Shift
0 ~ 99.99 MHz
2
43 SCOPE
Select the Spectrum Scope mode
CONT/CHK
CONT
44 SIDETONE
Adjust the CW sidetone volume level
0 ~ 100
50
45 SQL/RF-G
Select the configuration of the front panel’s
knob
RF-GAIN/SQL
1
46 SSB MIC
Adjust the microphone gain level for the SSB mode
0 ~ 100
50
47 SSB STEP
Select the tuning steps for the
knob on the SSB
mode
1/2.5/5 kHz
2.5 kHz
48 TONE FREQ
Setting the CTCSS Tone Frequency
50 Std CTCSS tones
88.5 Hz
49 TOT TIME
Select the Time-Out-Timer time
OFF/1 ~ 20 min
OFF
50 VOX DELAY
Set the “hang time” for the VOX circuitry
100 ~ 2500 msec
500 msec
51 VOX GAIN
Set the gain of the VOX circuitry’s input audio detector
1 ~ 100
50
52 EXTEND
Enable/disable the extended Menu Items (#53 ~ #57)
OFF/ON
OFF
53 DCS INV
Select “Normal” or “Inverted” DCS coding
Tn-Rn/Tn-Riv/
Tiv-Rn/Tiv-Riv
Tn-Rn
54 R LSB CAR
Set the Rx Carrier Point for LSB
-300 ~ +300 Hz
0 Hz
55 R USB CAR
Set the Rx Carrier Point for USB
-300 ~ +300 Hz
0 Hz
56 T LSB CAR
Set the Tx Carrier Point for LSB
-300 ~ +300 Hz
0 Hz
57 T USB CAR
Set the Tx Carrier Point for USB
-300 ~ +300 Hz
0 Hz
1: Depends on transceiver version.
2: Depends on operating band and transceiver version.
