40
Memory Operation
QMB Channel
QMB Channel Storage
1. Tune in the desired frequency and set the operating mode and bandwidth. If this is an
FM channel, set up any required CTCSS/DCS and repeater shift configurations.
2. Press and hold in the
key until a
double
“beep” is heard. The second beep pro-
vides audible confirmation that the data has been stored into the QMB memory.
Pressing the
(A
/
B)
key momentarily while in Operating Function Row 3
[STO,
RCL, PMS]
will also store a frequency into the QMB register.
QMB Channel Recall
1. Press the key momentarily, then rotate the
knob, as needed, until Operating
Function Row 3 [STO, RCL, PMS] appears on the display.
2. Press the
(RCL) key momentarily to recall the QMB memory. “QMB” will appear at
the upper right corner on the LCD.
3. Press the
(RCL) key once more to return to the previous frequency (either a VFO
frequency or a Memory channel).
If you move the
knob or
knob while in the QMB mode, you can change
frequencies as if you were in a “VFO” mode. You also can change operating mode
by pressing the
or
key. When this is done, the “
MTQMB
” will
appear in the display, where “
MT
” represents “Memory Tuning”. Press the
(RCL)
key once more to return to the originally-stored QMB frequency.
