Yaesu FT-65R Advance Manual Download Page 3

Page: 3 / 39

FT-65R/FT-65E Advance Manual

VFO Priority ..............................................................20

Memory Channel Priority ..........................................20

HOME Channel Priority ............................................21

WX Channel Priority .................................................21

Priority Revert Mode ................................................21

Automatic Lamp Illumination on Scan Stop................22

Emergency Channel Operation .................................23

ARTS (Automatic Range Transponder System) ......24

Basic ARTS Setup and Operation ..............................24

ARTS Polling Time Options ......................................25

ARTS Alert Beep Options .........................................25

CW Identifier Setup ..................................................26

DTMF Operation ..........................................................27

Manual DTMF Tone Generation ...............................27

DTMF Autodialer ......................................................27

Sending the DTMF code by Autodialer ....................28

Miscellaneous Settings ..............................................29

Password ....................................................................29

Setting a Password and Turning the Password

Feature ON or OFF ..................................................29

Changing the Channel Steps .....................................29

TX Battery Saver ........................................................30

Disabling the TX/BUSY LED Indicator .......................30

Automatic Power-Off (APO) Feature ..........................31

Transmitter Time-Out Timer (TOT) .............................31

Busy Channel Lock-Out (BCLO) ................................32

Changing the TX deviation Level ...............................32

Voice Compander Feature .........................................33

Inversion Scramble (Asian version only) ....................33

Cloning ........................................................................34

Set (Menu) Mode .........................................................35

Summary of Contents for FT-65R







































Search results

Summary of Contents for FT-65R

Reviews:

Yaesu FT-65R, Advance Manual, Page: 3 / 39

Search results

Summary of Contents for FT-65R

Reviews: