![background image](http://html2.mh-extra.com/html/yaesu/ft-65r/ft-65r_advance-manual_3131724021.webp)
20
Scanning
FT-65R/FT-65E Advance Manual
“Priority Channel” Scanning
The
FT-65R/E
scanning features include a two-channel scanning capability which allows
operation on a VFO or Memory channel, while periodically checking a user-defined
Memory Channel for activity. If a signal is received on the Memory Channel which is
strong enough to open the Squelch, the scanner will pause on that channel in accordance
with the Scan-Resume mode set via Set Mode Item “
25 RESUME
”.
For more details on the Scan-Resume mode, see page 36.
VFO Priority
1. Recall the memory channel that is to be set as the “Priority” frequency.
2. Set the transceiver to the VFO mode by pressing the [
V/M
] key.
3. Press the
F
key, then press the [
V/M
] key to activate the VFO Priority mode.
The display will remain on the VFO frequency, but every five seconds the transceiver
will check the Priority Channel (memory channel) for activity.
Every 5 seconds
4. To disable the VFO Priority Mode press the
F
key, and then press the [
V/M
] key.
Memory Channel Priority
1. Store the frequency you wish to be the “Priority” Channel into memory channel “001”.
2. Set the transceiver for operation on another memory channel.
3. Press the
F
key, then press the [
V/M
] key to activate the Memory Priority mode.
The display will remain on the current memory channel frequency, but every five
seconds the transceiver will check the Priority Channel (memory channel) for activity.
Every 5 seconds
4. Press the
F
key, then press the [
V/M
] key again to disable the Memory Priority Mode.
When the Memory Bank feature is activated, the
FT-65R/E
will check the
lowest memory channel number in the current Memory Bank as the priority
channel.