53
FT-2800M O
PERATING
M
ANUAL
20 RF SQL
Function
: Adjusts the RF Squelch threshold level.
Available Values
: 1 - 10, or OFF
Default
: OFF
21 RPTR
Function
: Sets the Repeater Shift direction.
Available Values
: –RPTR/+RPTR/SIMP
Default
: SIMP
22 RVRT
Function
: Enables/disables the “Priority Channel Revert” feature.
Available Values
: ON/OFF
Default
: OFF
23 SCAN
Function
: Selects the Scan Resume mode.
Available Values
: BUSY/HOLD/5 SEC
Default
: BUSY
BUSY: The scanner will remain halted for as long as there is carrier present on the channel;
after the carrier drops at the end of the other station’s transmission, the scanner will
resume.
HOLD: The scanner will halt on a signal it encounters. It will not restart automatically; you
must manually re-initiate scanning if you wish to resume.
5 SEC: The scanner will halt for five seconds
only
, after which scanning will resume (whether
or not the other station is still transmission).
24 SHIFT
Function
: Sets the magnitude of the Repeater Shift
Available Values
: 00.00 - 99.95 (MHz) (only shifts of less than 4 MHz will work)
Default
: 00.60 (MHz)
25 SKIP
Function
: Selects the Memory Scan mode.
Available Values
: SKIP/ONLY/OFF
Default
: OFF
SKIP:
The scanner will “skip” the flagged channels during scanning.
ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).
“S
ET
”
(
M
ENU
)
M
ODE
M
ENU
S
ELECTION
D
ETAILS
