FT-250R O
PERATING
M
ANUAL
31
The
FT-250R
includes a convenient “Clone” feature, which allows the memory and con-
figuration data from one transceiver to be transferred to another
FT-250R
. This can be
particularly useful when configuring a number of transceivers for a public service opera-
tion. Here is the procedure for Cloning one radio’s data to another:
c
Turn both radios off.
d
Connect the optional
CT-27
cloning cable between the
MIC/SP
jacks of the two ra-
dios.
e
Press and hold the
PTT
and
LAMP
key while turning the radio on.
f
Rotate the
DIAL
to select “
CLONE
CLONE
CLONE
CLONE
CLONE
.”
g
Press the [
F/L
] key, to enter the CLONE mode. “
CLONE
CLONE
CLONE
CLONE
CLONE
” will appear on the displays
of both radios when the Clone mode is successfully activated in this step.
h
On the Destination radio, press the
MONI
key (“
SAVING
SAVING
SAVING
SAVING
SAVING
” will appear on the LCD).
i
Press the
PTT
key on the Source radio; “
SENDING
SENDING
SENDING
SENDING
SENDING
” will appear on the Source radio,
and the data is transferred.
j
If there is a problem during the cloning process, “
C-ERROR
C-ERROR
C-ERROR
C-ERROR
C-ERROR
” will be displayed. Check
your cable connections and battery voltage, and try again.
k
If the data transfer is successful, the Destination radio will return to normal operation;
Turn both radios off and disconnect the
CT-27
. You can then turn the radios back on,
and begin normal operation.
Cloning
Optional Cloning Cable "CT-27"
