FT-250R O
PERATING
M
ANUAL
14
T
ONE
C
ALLING
(1750 Hz)
If the repeaters in your country require a 1750-Hz burst tone for access (typically in Eu-
rope), you can set the
MONI
key to serve as a “
T
ONE
C
ALL
” switch instead. To change the
configuration of this switch, we again use the Menu to help us.
c
Press the [
F/L
] key, then press the [
0
(
SET
)] key to enter the Set mode.
d
Rotate the
DIAL
to select Menu Item #19 (“
MON
MON
MON
MON
MON
/
TCL
TCL
TCL
TCL
TCL
”).
e
Press the [
F/L
] key to enable adjustment of this Menu item.
f
Rotate the
DIAL
to select “
T.CALL
T.CALL
T.CALL
T.CALL
T.CALL
” on the display.
g
Press the
PTT
key to save the new setting and exit to normal operation.
ANI O
PERATION
(A
UTOMATIC
N
UMBER
I
DENTIFICATION
)
When you activate the ANI feature, the DTMF tones stored in ANI memory will automati-
cally be sent whenever you press the
PTT
button.
Here is the ANI storage procedure:
c
Press the [
F/L
] key, then press the [
0
(
SET
)] key, to enter the Set mode.
d
Rotate the
DIAL
to select Menu #36 (“
ANI
ANI
ANI
ANI
ANI
”).
e
Press the [
F/L
] key to enable changing of this Menu item.
f
Press the [
F/L
key, then press the [
F/L
] key again, to begin entry of the letters and
numbers in the ANI code.
g
Rotate the
DIAL
to select the first letter or number in the ANI code. When the correct
character has been selected, press the [ (
MHz
)] key to move on to the next character.
h
Repeat step
g
as many times as necessary to complete the ANI code.
i
When you have completed entry of the ANI code, press the [
F/L
] key.
j
Press the
PTT
key to save the settings and exit to normal operation.
To activate the ANI identifier:
c
Press the [
F/L
] key, then press the [
0
(
SET
)] key, to enter the Set mode.
d
Rotate the
DIAL
to select Menu #36 (“
ANI
ANI
ANI
ANI
ANI
”).
e
Press the [
F/L
] key to enable changing of this Menu item.
f
Rotate the
DIAL
to set the ANI function ON.
g
When you have made your selection, press the
PTT
key to save the new setting and
exit to normal operation.
Advanced Operation
