background image

3

Important Notes

• 

All responsibility for the use of this software lies with the customer. YAESU MUSEN CO., LTD cannot be 

held liable in any way for damages or losses, which may be incurred by the customer as a result of using 

this software.

• 

Copyrights and all other intellectual property rights for the software, as well as the software manual, are the 

property of YAESU MUSEN CO., LTD.

• 

Revision, modification, reverse engineering, or decompiling of this software is prohibited. Redistribution, 

transfer, or resale of downloaded files, is also prohibited.

• 

Downloaded files are for personal use only, any commercial use is prohibited.

• 

If you cannot perform the firmware installation yourself, please consult with one of our sales sites or service 

centers for assistance.

Company and product names described in this manual are trademarks or registered trademarks.

Microsoft

®

, Windows

®

, Windows

®

 7, Window

s

®

 8, Windows

®

 8.1, Windows

®

 10 are regi

stered trademarks 

of Microsoft Corporation in the United States and other countries.

Install / Uninstall Procedure

Installation procedure

Please visit Yaesu website (http://www.yaesu.com/) and download the Firmware files (see below).

•  RX-UNIT:

  DR-2X_MAIN_vRxxxx

•  DSP:

 

PCTOOLe_vxxxx

(* “xxxx” refers to the version number.)

Uninstall procedure

Delete the folder opened by the program.

The operation will end if the opened folder is deleted since no data will be written to the registry and system 

folder.

Summary of Contents for DR-2X










Reviews: