Yada AC532791 User Manual Download Page 8

8

NOTE: 

Fully charge the Jump Starter upon receipt. Check battery status periodically and recharge every 

2-3 months and after every use to maintain the efficiency and to prolong the life of the internal battery. 

CHARGING THE JUMP STARTER:

At home:

Micro USB Cable

1. Plug included Micro USB Charging Cable 

into a USB-A port on a 2A USB wall adapter 

(not included).

2. Connect the Micro USB Charging Cable 

into the Micro USB Charge Input Port on the 

Jump Starter.

3. Disconnect the Jump Starter when it is fully 

charged. Store the Jump Starter in a safe 

place when not in use.

In Car:

1. Plug Micro USB Charging Cable into 12V 

USB Charger (not included)  then connect it 

to 12V socket in vehicle. 

2. Connect the Micro USB Charging Cable 

into the Micro USB Charge Input Port on the 

Jump Starter. 

3. Disconnect the Jump Starter when it is fully 

charged. Store the Jump Starter in a safe 

place when not in use.

Other Charging Method 

USB-A to USB-C Cable / USB-C to USB-C Cable

 (cables not included)

1. Plug one end of USB-C Charging Cable into 

a USB-A or USB-C port on a 18W (or above) 

wall adapter (not included).

2. Connect the other end of USB-C Charging 

Cable into the USB-C Charging Input Port on 

the Jump Starter.

3. Disconnect the Jump Starter when it is fully 

charged. Store the Jump Starter in a safe 

place when not in use.

Summary of Contents for AC532791

















Reviews: