Yada AC532791 User Manual Download Page 3

3

INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS
• Always wear safety glasses when jump starting a battery (to protect your 

eyes), and gloves when handling a battery (to protect your hands).

• When jump starting a vehicle please ensure that the gray plug is securely 

fitted into the jump starter socket on the jump starter.

• Ensure the battery clamps are connected correctly, and the connectors are 

free from rust and dirt.

• Do not allow this product to become wet. Exposure to excessive moisture 

will damage the unit.

• Do not immerse the product in water.

• Do not operate the product in explosive atmospheres, such as in the 

presence of flammable liquid, gas or dust.

• Do not modify or disassemble this product. 

• Do not store in locations where the temperature may exceed 104ºF (40ºC).

• Charge only using the USB Cable provided.

• Under extreme heat conditions, battery leakage may occur. Avoid contact 

with your skin. In case of skin or eye contact, rinse immediately with clean 

water and seek medical attention.

• If battery leakage occurs, take it to your local battery recycling center for 

disposal. Do not attempt to use.

• This car jump starter is for use with 12V vehicles only. Using on non-12V 

vehicles may cause serious damage to the vehicle, jump starter, or injury 

to the user. Refer to the owner’s manual for the vehicle if you are uncertain 

what voltage the vehicle runs on.

BATTERY DISPOSAL
The battery is self-contained and not consumer replaceable.  The battery must 

be disposed of properly when it no longer holds a charge.  Proper charging 

practices will increase the life of the product.  For information on battery 

recycling, call toll-free 800-822-8837.

For information regarding air travel safety with batteries please check the U.S. 

Department of  Transportation prior to travel at:

http://phmsa.dot.gov/safetravel/batteries

or contact your airline if traveling from a country outside the U.S.

Note:  The Car Jump Starter gives 37 watt hours of power.

WARNING:

Summary of Contents for AC532791

















Reviews: