Yada AC532791 User Manual Download Page 15

15

FCC Compliance Statement:

Jump Starter & Power Bank

Model: AC532791

Responsible Party: 

   

ADC Solutions Auto, LLC

   

2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626

   

Tel: 1-866-294-9244

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: 

(1)  This device may not cause harmful interference, and 

(2)  This device must accept any interference received, including interference that 

  may cause undesired operation.

This device complies with Part 18 of the FCC Rules.

Warning: Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment.

The manufacturer is not responsible for any radio or TV interference caused by 

unauthorized modifications or change to this equipment. Such modifications or 

change could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the equipment and the receiver.

-  Connect the equipment into an outlet on a circuit different from that to which the 

  receiver is connected.

-  Consult the dealer or an experienced radio/TV technician for help.

The ‘Qi’ symbol is a trademark of the Wireless Power Consortium

WARRANTY CONT.:

Summary of Contents for AC532791

















Reviews: