Yada AC532713 User Manual Download Page 4

4

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

 - This manual contains important safety 

and operating instructions for battery charger Model AC532713.
1. Do not expose charger to rain or snow.

2. Use of an attachment not recommended or sold by the battery charger 

manufacturer may result in a risk of fire, electric shock, or injury to persons.

3. To reduce risk of damage to electric plug and cord, pull by plug rather than 

cord when disconnecting charger.

4. An extension cord should not be used. Use of improper extension cord could 

result in a risk of fire and electric shock. 

5. Do not operate charger with damaged cord or plug – replace the cord or 

plug immediately.

6. Do not operate charger if it has received a sharp blow, been dropped, or 

otherwise damaged in any way; take it to a qualified serviceman.

7. Do not disassemble charger; take it to a qualified serviceman when service 

or repair is required. Incorrect reassembly may result in a risk of electric shock 

or fire.

8. To reduce risk of electric shock, unplug charger from outlet before 

attempting any maintenance or cleaning. Turning off controls will not reduce 

this risk.

WARNING – RISK OF EXPLOSIVE GASES.
a) WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES 

GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. 

FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE 

INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

b) To reduce risk of battery explosion, follow these instructions and those 

published by battery manufacturer and manufacturer of any equipment 

you intend to use in vicinity of battery. Review cautionary marking on these 

products and on engine.

PERSONAL PRECAUTIONS
a) Consider having someone close enough by to come to your aid when you 

work near a lead-acid battery.

b) Have plenty of fresh water and soap nearby in case battery acid contacts 

skin, clothing, or eyes.

c) Wear complete eye protection and clothing protection. Avoid touching eyes 

while working near battery.

d) If battery acid contacts skin or clothing, wash immediately with soap and 

water. If acid enters eye, immediately flood eye with running cold water for at 

Summary of Contents for AC532713













Reviews: