Yada AC532713 User Manual Download Page 3

3

• The product may be used by children of 8 years and above and by persons with 

reduced physical, sensory or mental capability or lack of experience and knowledge 

provided they have been given supervision or instruction concerning use of the 

product in a safe way and understand the hazards involved.

• Never let children play with the product.

• Cleaning and user maintenance shall not be made by children without supervision.

• Warning: Charging produces explosive gases, make sure that the place where the 

product is used is free from sparks and naked flames. Make sure that the place where 

the product is used is well ventilated.

• The product is intended for indoor use only. 

• Warning: Never try to charge non-rechargeable batteries.

• Warning: Keep the product, its mains lead and plug away from water and moisture 

to avoid the risk of electric shock.

• If the mains lead is damaged it should only be replaced by a qualified electrician.

• Ensure that the mains lead is unplugged before connecting a battery to the product.

• The charger is only intended for charging rechargeable Li-ion, Gel and AGM type lead-

acid batteries. Charging other types of batteries than these can damage the charger, 

battery or other property.

• Never try to charge dry-cell batteries, they can explode and cause damage.

• Do not use the charger if the mains lead is damaged. If the mains lead is damaged it 

should only be replaced by a qualified electrician.

• The charger should not be used if it is in any way damaged or malfunctioning.

• Do not place the charger close to the battery being charged, the battery will emit 

fumes which can corrode the charger. Place the charger as far as possible from the 

battery as the connection cables allow.

• Never try to dismantle, repair or modify the charger in any way. 

• Make sure that the Battery Clamps of the charger leads don’t touch each other once 

the charger has been connected to a wall socket.

• Always unplug the charger from the wall socket before disconnecting the charger 

leads from the battery.

• See that the place where charging takes place is well-ventilated.

• During charging the battery can emit explosive gases. Be careful to ensure that the 

charger leads don’t touch each other when they are being disconnected from the 

battery after charging.

• Do not smoke in the vicinity of the battery whilst charging is in progress.

• Do not cover the charger.

• The charger should not be used by persons who have not read and understood the 

contents of this manual.

• A frozen battery must never be charged, always defrost it first.

Please read the entire instruction manual before using the product and then save it for 

future reference. We reserve the right for any errors in text or images and any necessary 

changes made to technical data. In the event of technical problems or other queries, please 

contact our Customer Services (see address details on the back). 

WARNING:

Summary of Contents for AC532713













Reviews: