Page 28 of 45
SNMP setting
The website SNMP setting (SNMP Configuration) allows the user to perform system- and trap-settings for
SNMP.
Figure 4.8.: Website ’SNMP-Configuration
`
To change the system information on the switch, perform the following steps:
1.
Device Name:
Enter the device name; usually this is the switch type.
2.
Description:
Here you enter a short functional description.
3.
Physical Address:
Enter here the location of the switch.
4.
Contact:
Enter a contact address.
In the second part, you can configure the trap:
1.
IP address of the first trap manager:
Enter the IP address of the first Trapmanager,
2.
IP address of the second trap manager:
Enter the IP address of the second Trapmanager,
3.
Send Traps:
Turn the sending of traps on or off.
4. Click on 'Apply'.
Software Update
The website 'Software Update' allows the user to update the firmware of the switch via a TFTP server. To
prepare a software update, perform the following steps:
1.
IP address of the TFTP server:
Enter the IP address of the TFTP server.
2.
File name and path:
Enter the path and file name.
3. Click on 'Apply'
