14
POWER CONFIGURATION
The power cable is composed of 5 wires: black / red / white / green / yellow. YS PRO must be
wired to your main battery. Other configurations are optional, depending on the needs of you and
your boat. Please refer to the power diagram page 15.
1. Connect to main battery (required)
Plug the black and the red cable into your main battery. YS PRO average consumption stays un-
der 0,3W in low consumption mode. Main battery monitoring is available 24/7.
Find more information about the battery consumption page 23.
2. Monitor a second battery (option)
The white cable will allow you to monitor a second battery. No additional power consumption will
be drawn. Second battery monitoring is available 24/7.
3. NMEA 2000 Relay (option)
The NMEA instruments are usually powered down while
the boat is not in navigation. To allow YS
PRO to collect data when away from your boat, the integrated relay has the ability to power the
NMEA from the user app. After 5 minutes of operation, the YS PRO will turn off the relay.
Please refer to the relay characteristics section page 15 for installation.
WARNING: The relay shall be installed by a trained and qualified installer.
Summary of Contents for YS PRO
