Yacht Devices YDNG-03, User Manual, Page: 21 / 48

— 21 —
5. 0183_RTE_TYPE=x and 0183_RTE_FILTER=y
Where x – WHITE or BLACK, y - empty string or the list of 3-char NMEA 0183 sentence formatters
separated by a comma.
Factory setting: x - WHITE, y - empty.
These settings are similar to those described in VI.2 and VI.3. This filter defines which sentences received
from the NMEA 0183 port should be forwarded to NMEA 0183 output. An empty filter of WHITE type
(factory setting) prohibits forwarding. An empty filter of BLACK type allows forwarding of all received
messages and turns the Gateway into a NMEA 0183 repeater. A non-empty list puts the Gateway into
multiplexer mode, where NMEA 0183 output stream contains a mix of received NMEA 0183 sentences
and sentences converted from NMEA 2000 messages.
6. RAY_AUTOPILOT=x
Where x – ON or OFF
Factory setting: OFF
Turn on the special support of Raymarine SeaTalk NG autopilots during conversion of autopilot sentences
from NMEA 0183 to NMEA 2000. See the section IX for details.
7. WPT_AUTO_CONFIRM=x
Where x – ON or OFF
Factory setting: OFF
When the application is switching to the next waypoint, autopilot asks for confirmation on the pilot head
and a chart plotter. This setting allows automatic confirmation of the course changing.
8. RMB_N2K_VARIATION=x
Where x – ON or OFF
Factory setting: OFF