— 21 —
String format
Examples
Description
YD:STOP
Stop playback and external LED indication.
YD:VOLUME [0..100]
YD:VOLUME 100
Set sound volume in percent, 0 turns off all
sound signals.
YD:LINK <1..28>
<SOUND | LED> [1..28]
YD:LINK 1 SOUND 1
YD:LINK 2 LED 2
YD:LINK 2 LED
Link specified sound or LED indication
sequence with the event. In MOB mode, only
the event number 1 is used. One sound or
sequence can be linked with multiple events.
You can also query current setting as shown in
third example.
YD:EVENT <1..28>
<OFF | ON>
YD:EVENT 3 OFF
Enable or disable the event with specified
number. This setting is ignored in the MOB
mode.
YD:INTERVAL <1..28>
[0..6000.0]
YD:INTERVAL 1 0.5
YD:INTERVAL 3 60
Set interval (in seconds, second parameter)
between sound playbacks for specified event.
One sound can be linked with multiple events.
MOB mode commands
YD:MOB [TEST | ACTIVE] YD:MOB TEST
Set MOB type text for messages sent by the
Device. Note that messages sent from Device
are not transmitted externally via VHF or AIS.
Both types are displayed in the same way on
chart plotters, the difference is only in the text
displayed.
YD:HOLD [1..10]
YD: HOLD 2
Set button hold time required for MOB
activation, in seconds.
YD:DURATION [OFF |
0..600]
YD:DURATION 10
Set sound playback duration, in seconds. 0
value or OFF sets perpetual playback.
Table 1 continued
