12
Functions
●
Temperature sensor
If the temperature of your skin or the treatment head becomes too high, the power will be turned off for safety (the device beeps 10 times).
If this happens, let the device rest for about 30 minutes.
●
Motion sensor
The motion sensor detects movement of the device and pauses output for safety reasons when the device is stopped or when the electrode head has been used on the same area continuously.
●
Current sensor
Detects whether the electrode is touching your skin and activates the output.
●
Output Control Sensor
Constantly monitors the current flowing through your skin and adjusts the output to the appropriate level. If a strong current flows between the electrodes, the power is turned off for safety.
Equipped with a variety of sensors for safe use.
Excessive care is prevented by controlling the output according to the condition of the device and your skin.
●
Timer
One beep will sound to indicate the half-way point in the operation time. Refer to pages 17 and 18 for each mode’s operating time.
●
Standby Mode
(only if Weekly Care is selected)
When treatment in a certain mode is completed, the device will emit short rapid beeping sounds and the following mode indicator flashes (Standby Mode indicates operation has stopped).
Refer to pages 17 and 18 for each mode’s operating time.
Briefly press the mode button again to start the mode that was flashing.
When treatment in COOL Mode has finished, the device will emit short rapid beeping sounds and the power will switch off automatically without the device going to Standby Mode.
●
Auto Power-off
If the device is not used within approx. 5 minutes of going into Standby Mode, it will emit short rapid beeping sounds and switch off automatically.
Safety functions
Other Features