PartPro300 xT
3
1. INTRODUCTION
Before installing the consumable parts, read the following safety precautions, and comply with safety rules when
using, operating, unboxing this product, replacing or removing any components, or maintaining this product.
For more information related to the PartPro300xT 3D Printer or XYZprinting, visit the official website
(http://www.pro.xyzprinting.com) or contact a sales representative.
• When using the product, please place this product on a flat ground; placing the printer on an uneven or unstable
surface may result in the printer falling/flipping or injuring.
• Please do not place any containers with water on (or around) the product; if liquid spills out or into the machine,
it may lead to risk or safety concerns.
• Keep the printer, ink cartridge, consumable and post processing equipment away from fire sources. Please do
not modify or install any non-original accessories.
• Please verify that the power cord is appropriately plugged into the printer and outlet.
• When troubleshooting errors, please stay within the limits of this manual; if the error cannot be repaired, please
contact customer service center.
• When printer is booted, the accessories and components in the machine will perform various actions.
• Please make sure that no objects are in contact with or blocking the operation of components in the machine.
• Before printing, close the top cover or the machine will not perform actions.
• Please use original supplies with the product to ensure print quality and printer lifespan. Any malfunction or
abnormal operations due to use of non-original supplies will not be covered under warranty.
• When the printer is powered, the product will enter standby printing mode; do not move the printer while
it is powered.
• Please place the printer in a designated space; lower case independent ventilation is recommended for the area,
as the printer will produce dust during preparation sequences. We suggest dust collection equipment and wearing
standard personal protective equipment (PPE) for periods of prolonged use.
• Please avoid placing consumable under direct sunlight or high temperature environment.
• Please place and operate the printer in a well-ventilated area.
• Please read the guide carefully before using the printer.
• Do not let children operate this device without adult supervision.
• Please ensure the recommended operating conditions. (Operating Temperature 15 ~ 32 °C / 59 ~ 89.6 °F;
Operation Humidity 30 ~ 60 % RH (no condensation))
• For best printing quality, filament should preferably be stored at temperatures between 10 ~ 40 °C / 50 ~ 104 °F.
If a different storage temperature is printed on the label on the filament package, please adhere to the
recommended conditions on the label.
• Please always refer to the updated version of PartPro300 xT user manual:
https://pro.xyzprinting.com/support/en-US/Help
1.1 Safety and regulation
