XYZ Printing da Vinci Jr. WiFi Pro, Quick Manual

Page: 5 / 70

P 5 HD23FJPW1A7
da Vinci
Jr. WiFi Pro
Guide Tube Installation
Please push the tube remover into the extruder
module port then ensure that the guide tube has
been tightly inserted into the extruder module port.
Place the extruder module that the fitting pin is
secured the proper location. Then, insert the black
ribbon connector to complete the installation.
Put a guide tube though the guide tube movement area
and then insert it into the extruder module. To finish the
installation, insert the guide tube downward firmly.
Note:
Please insert the guide tube (B) into the tube remover (A)
which assist to the guide tube installation and remove.
Please keep the tube remover on the guide tube after
guide installation.
Tube remover
1
3
2
A
B
Guide tube
A
B
Accessories Installation
1 3
Pull out the guide tube. 2
Use two fingers press
the Feeder on the Feed
module.
Please gently press the tube remover, pull the guide
tube upwards to remove the guide tube.
How to Remove the Guide Tube