Ver.1
April 2016
P 5
da Vinci
Note: Please follow these steps and ensure that the guide tube is properly installed before
starting the "LOAD FILAMENT" function. Failure to install the guide tube may disrupt filament feed.
Reminder: If you are not too sure where the feed module tube port is,
you may open the casing of the machine to see the indication label.
Installing the Accessories
Install the filament guide tube
Run the guide tube through
the gap over the printing
chamber to the filament feed
hole.
Ensure that the guide tube has been tightly
inserted into the feeding hole.
2
1
Remove the extruder
Press the white button at the
back of the extruder to release it.
Install the filament guide tube to the extruder
Insert the guide tube into the feed hole all the way down and install the extruder
back to the printer.
3
4
Install the extruder
Align the extruder with the bracket and
press the extruder to fix it to the holder.
5
