User Manual da Vinci 2.0 Duo
P 8
Chapter 4 Connect the cable
<A. USB Port / B. Power Connector>
Connect USB cable and power cord
Connect the printer power cord and USB cable to the back of the printer.
Power On the printer
Please switch the power button to “I” icon. When information is shown on the display panel, the
printer is powered on correctly.
Warning
●
Make sure to set the power switch to the “off ” position before inserting the power cord.
●
Make sure the power cord is properly connected. Incorrect use may cause damage to the printer.
●
Make sure to remove the power cord from printer if you are storing or not using the printer for an extended
period of time.
●
Make sure to avoid power strips to power the printer . Use a wall outlet.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
