User Manual da Vinci 2.0 Duo
P 13
5-1.1.3 UNLOAD FILAMENT
1.Select the cartridge to be unloaded.
For loading cartridge 1, please
select "CARTRIDGE1".
2.Select "UNLOAD FILAMENT" and
"OK".
3.Extruder should be heated to
working temperature.
Please wait until further instructed.
4.Pull the filament out from the
extruder as instructed and press
"OK".
Remove filament when printer has reached working temperature as instructed. Then remove cartridge
locker and the cartridge unloaded.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
