P 15
V1
XYZprinting 3D Printer
User Manual
This 3D printer is mainly used to print paste-like materials. The picture shows the play-doh. The
cartridge will use pressure injection to extrude the material and stack them to form the desired
3D shape. The play-doh offers many potential applications. Users are free to use their creativity
and use different materials as needed.
Fill the material so that it is level with the ingre-
dient tube outlet, and then place the screw cap.
Push the plunger forward from the inlet end
of the ingredient tube and make sure that the
material is extruded from the nozzle.
2-5 Cartridge loading demonstration - play-doh
04
05
Prepare the Ingredient tube and the materials
to be loaded into the ingredient tube.
Before refilling, make sure that the ingredient
tube is dry, the screw cap has been removed,
and that the plunger is pushed to the cartridge
outlet end.
Use the steel spoon to load the material.
Refill the ingredient tube with the material
by using the spoon and make sure that the
material is tightly packed.
01
02
03
After refilling the ingredient tube with material,
you can put the tube in the printer and print
the object.
06
