SensoLyt
®
700 IQ H
Technical data
31
ba76206e02
12/2020
The SensoLyt
®
700 IQ H meets the requirements according to article
3(3) of the directive 97/23/EC ("pressure equipment directive").
Depth of immersion
Type of protection
Sensor with connected SACIQ sensor connection cable:
Max. allowed overpressure
with electrode
SensoLyt
®
ECA installed
6 x10
5
Pa (6 bar) *
Max. allowed overpressure
with electrode
SensoLyt
®
SEA-HP installed
10
6
Pa (10 bar) **
* temperature dependent (see safety instruction below)
** in the entire temperature range
with installed combination elec-
trode, SensoLyt
®
SEA, DWA, PtA
min. 10 cm; max. 100 m *
with installed combination elec-
trode, SensoLyt
®
ECA
min. 10 cm; max. 60 m *
with installed combination elec-
trode, SensoLyt
®
SEA-HP
min. 10 cm; max. 100 m **
* temperature dependent (see safety instruction below)
** in the entire temperature range
ACHTUNG
The pressure resistance of the operable pH/ORP arma-
ture can be restricted by the pressure resistance of the
electrode. When selecting the electrode make sure it is
suitable for the intended pressure and temperature
range.
Sensor with an electrode includ-
ing SACIQ sensor connection
cable installed
IP 68, 10 bar (106 Pa)
Sensor plug head connector with-
out sensor connection cable (sen-
sor with the electrode installed)
IP 67
Summary of Contents for YSI ViSolid 700 IQ
Page 38: ...Contact Information SensoLyt 700 IQ H 38 ba76206e02 12 2020...
Page 39: ......