pH/Cond 3320
Operation
ba77054d01
02/2014
15
4.4.2
Measured value display
In the measured value display, open the setting menus with
<ENTER>
. The
current functions of the softkeys are shown on the display.
Use
<ENTER>
(short pressure) to open the menu for calibration and mea-
surement settings for the displayed measured parameter.
Use
<ENTER__>
(long keystroke (approx. 2 s) to open the
Storage & config
menu with the sensor-independent settings.
Use the keys of the keypad to carry out further functions such as storage or cali-
bration (see section 4.1.1 K
, page 11). These functions are not available
in other operating situations.
4.4.3
Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
To select a subelement, use the
<
><
>
keys. The current selection is dis-
played with a frame.
To make further settings, switch to the next higher menu level with
<F1>
[Back].
Use
<M>
to return to the measured value display.
4.4.4
Elements in menus and dialogs
Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<ENTER>
. Example:
Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with
<ENTER>
. Subsequently,
the setting can be changed with
<
><
>
and
<ENTER>
. Example:
General
Interface
Clock
Service information
Reset
System
15.02.2014
14:15
Back
Summary of Contents for WTW pH/Cond 3320
Page 80: ...Index pH Cond 3320 80 ba77054d01 02 2014...
Page 81: ......
