Settings
Multi 3320
62
ba77053e04
07/2018
10.1.5 Settings for ISE measurements
The settings for ISE measurements are made in the menu for calibration and
measurement settings of the ISE measurement. To open the settings, display
the required measured parameter in the measured value display and press the
<ENTER>
key. After completing the settings, switch to the measured value dis-
play with
<M>
.
In the following table, only those settings are listed that influence the ISE mea-
surement:
Menu item
Possible setting
Explanation
Calibration
/
Calibration record
-
Displays the calibration
record of the last calibra-
tion.
Calibration
/
Calibration data
storage
/
Output to
USB
-
Outputs the calibration
records to the interface.
Calibration
/
Calibration data
storage
/
Display
-
Displays the calibration
record.
Further options:
Scroll through the cali-
bration records with
<
><
>
.
Output the displayed
calibration record to the
interface with
<F2>
/
[USB output]
.
Output all calibration
records to the interface
with
<F2
_
>
/
[USB out-
put]
.
Quit the display with
<F1>
/
[Back]
or
<ENTER>
.
Switch directly to the
measured value display
with
<M>
.
Alternative tem-
perature
On
Off
Takes the temperature
value from the 2nd sensor.
Man. temperature
-25 ...
+25
... +130 °C
Entry of the manually
determined temperature.
For measurements without
temperature sensor only.
