Xylem wtw MIQ/IDS, Operating Manual, Page: 11 / 62

MIQ/IDS Installation
11
ba77277d01 01/2024
3 Installation
3.1 IQ S
ENSOR
N
ET
system requirements
Software versions of
the controller and
terminal
components
The operation of the MIQ/IDS requires the following software versions in the
IQ S
ENSOR
N
ET
:
3.2 Scope of delivery

MIQ module

Accessory set, including:
– 4 x cable glands (clamping range 4.5-10 mm) with seals and blind plugs
– 4x ISO blind nuts M4 with suitable socket head screws and plain washers
– 2x countersunk screws M3x6 to close the module lid
(+ 2 spare ones)
– 1 x contact base with fixing screws

Accessory set, including:
– 1 x extension M16x1.5 to M20x1.5 with O-ring
– 1 x cable gland

Operating manual.
3.3 Basic principles of installation
3.3.1 Requirements of the measurement location
The measurement location must meet the environmental conditions specified in
section 11.1 G
ENERAL DATA
.
Controlled ambient
conditions
Work on the open instrument (e.g. during mounting, installation, maintenance)
may only be carried out under controlled environmental conditions:

DIQ/S 282/284 Controller software: Version 4.00 or higher

MIQ/MC3 Controller software: Version 4.00 or higher

MIQ/MC2 Controller software: Version 4.00 or higher

MIQ TC 2020 3G/XT Controller software: Version 4.00 or higher
Temperature + 5 °C ... + 40 °C (+ 41 ... +104 °F)
Relative air moisture
≤
80 %