13
EN |
Operation and display elements
The Battery Charger LG/65/PB-M is equipped with a clear operation
and display panel. The LEDs inform you about the charging status of
the rechargeable battery as well as a defective, short-circuited or
reverse-poled rechargeable battery at any time.
Charging the storage battery
The integral battery is a maintenance-free sealed lead-acid
battery.
Charge the storage battery for at least 5 hours prior to the first
use.
The charging time depends on the charge level of the battery. The
charging current is 2 A, which means approx. 3-4 hours of charging time for
an empty battery.
To avoid a total discharge, a protective mechanism is built-in, which
automatically switches off the device when the voltage is too low.
The storage battery cannot be overcharged as the battery charger
switches to compensation charge as soon as the battery is fully charged.
For longer periods of non-use, top up the charge regularly
(connect the battery to the charger).
In any case, avoid a total discharge as otherwise the storage battery will
be damaged.
Charging status indicator:
The charging status is indicated by the LED (1). As long as the
battery is being charged, the LED flashes green.
When the battery is full, the LED lights up constantly green and the charger
automatically switches automatically into Floating phase.
Fault indicator:
The charger recognises defective rechargeable batteries, a short
circuit or a battery which has been connected with wrong polarity
automatically. In this case the selected charging programme will not
be started. LED (2) is constantly on.
