Xylem Sontek River Surveyor RS5, User Manual

Page: 131 / 149

SonTek RS5 User Manual (August 2020) 131

Automatic MATLAB Export
When this option is enabled, when a file is opened, the MATLAB export function will
automatically create the exported files in a separate folder to facilitate processing in
QRev.

Side-bar Parameter Ordering
This setting allows the user to manually order the parameters displayed in the side-bar
(top left). Alternatively, and user can select automatic ordering (alphabetical).

Visible Time Series charts
This option allows the user to select the number of time series charts displayed in the
Time Series tab.

Summary Report chart type
The user can select here what charts to include in the Summary Report (described in
Section 8.7.3). Options include None, Time Series, Transect, or Time Series &
Transect.

Extrap method fit type
This setting allows the user to choose what data the EXTRAP method (via Discharge
Settings) will use for its calculations and results. Options include a single Transect, or
the entire Measurement. The default is Measurement.
B-3. Units Tab
This is where the user can adjust units displayed in the software. This is also where the
number of decimals displayed can be configured as well. Use the ‘Metric’ or
‘US/Imperial’ buttons on the bottom right to set all applicable units to either choice if
desired. The choices selected here will be saved for subsequent software sessions.
Measurement Value Unit Options
Amplitude Counts
Angle Degrees, Radians
Area Square feet, Square meters
Counts Counts
Depth Centimeters, Fathoms, Feet, Inches,
Kilometers, Meters, Miles, Millimeters,
Yards
Discharge Acre feet per day, Acre feet per hour,
Cubic feet per second, Cubic meters per
second, Liters per second, Megaliters per
day, Million UK gallons per day, Million
US gallons per day, UK gallons per
minute, US gallons per minute