124
The selected measured value is displayed for information (Fig. 90).
Fig. 90
«
Measuring speed
» or drift will determine the span of time after which the measured value will be accepted
following a titration step (Fig. 91).
Fig. 91
Drift-controlled acceptance of the measured value in terms of mV/min is set by selecting «
norma
l», «
fast
» or
«
user-defined
The drift values at predefined in terms of in mV/min for
normal
and
fast
drift:
Normal Drift
20 mV/min
Fast Drift
50 mV/min
Small drift value
= slow and precise
Large drift value
= fast and “less precise”
The following parameter selection can be made for
user-defined
drift setting:
Minimum holding time [s] 01 - 99
Maximum holding time [s] 01 - 99
Measuring time [s]
01 - 99
Drift [mv/min]
01 - 99
