Push button
Function
• Main view (see parameter 6.4.1): decreases the
required value for the selected control mode
• Parameter menu (see parameter 6.4.2): decreases
the displayed parameter index
• Parameter view / editing (see parameter 6.4.2):
decreases the value of the displayed parameter
• Zero pressure auto-calibration (see parameter 6.5,
P44): automatic calibration of the pressure sensor.
• Main view (see parameter 6.4.1): increases the
required value for the selected control mode
• Parameter menu (see parameter 6.4.2): increases
the displayed parameter index
• Parameter view / editing (see parameter 6.4.2):
increases the value of the displayed parameter
• Zero pressure auto-calibration (see parameter 6.5,
P44): automatic calibration of the pressure sensor.
• Main view (see parameter 6.4.1): START/STOP the
pump
• Parameter menu (see parameter 6.4.2): switches to
parameter view / editing
• Parameter view / editing (see parameter 6.4.2):
saves the value of the parameter.
long press
• Main view (see parameter 6.4.2): switches to
parameter selection
• Parameters Menu: switches to Main Visualization
and
Main view: alternates between Speed and Head units of
measure (see parameter 6.4.1).
and
Main view: alternates between Speed and Head units of
measure (see parameter 6.4.1).
6.4 LED description
6.4.1 POWER (power supply)
When ON (POWER) the pump is powered and the electronic devices are operational.
6.4.2 STATUS
LED
Status
Off
Pump unit stopped
Green steady
Pump unit in operation
Flashing green and orange
Non-locking alarm with the pump unit in operation
Orange steady
Non-locking alarm with the pump unit stopped
Red steady
Locking error, the pump unit cannot be started
6.4.3 SPEED (speed bar)
The speed bar consists of 10 LEDs, each representing the speed range between
parameter P27 (minimum speed) and parameter P26 (maximum speed) from 0-100% in
intervals of 10%.
LED bar
Status
On
Motor in operation; the speed corresponds to the
percentage step represented by the LEDs ON in the bar
(for example, 3 LEDs ON = speed 30%)
6 System Setup and Operation
Smart Pump Range INSTRUCTION MANUAL
25
