User manual EBI 330
V 1.1
Page 9 / 16
LEDs
The logger has a green and a red LED.
When pushing the start/stop button, the LED will flash as
long as you keep the button pushed - red for start, green for
stop. Start and stop, respectively, are confirmed by triple
blinking of the LED.
As soon as the logger is started, the green LED will blink
every five seconds. This will continue until the logger is being
stopped, the battery is empty, or a temperature limit has
been violated.
Should any of temperature limits be violated for longer than
the configured alarm delay, the logger will blink red instead of
green every five seconds. This will continue until the logger is
being stopped or the battery is empty.
When the logger is being stopped, the LED will double blink
every five seconds
–
green, if no limit has been violated,
otherwise red.
