Chapter 4 - Memory Expansion Module Installation
4-1
Chapter 4 - Memory Expansion Module
Installation
Memory Expansion Module Installation
The XVME-956/101 Memory Expansion Module (MEM) is an embedded
system module which provides a convenient means to expand your Xycom
VME AT system. The XVME-956/101 MEM four byte-wide memory sock-
ets are organized into two groups of two sockets each. Each group can be
configured for a different type of memory device, allowing many possible
memory configurations. All of the 32 to 512 Kbyte static RAMs, as well as
many types of Flash EPROMs are supported.
This chapter describes how to configure and install the memory expansion
module. Before using the memory expansion module, install the memory
devices and verify the jumper settings.
Jumper Configuration Summary
Table 4-1 summarizes the expansion module unit's configuration jumpers.
Table 4-1. Jumper Option Summary
Jumper
Function
W1
W2
W3
W4
W5
W6
W7
W8
W9
W10
W11
J2
J3
J4
J5
Write enable/protect for devices in sockets A and B
Jumpering for Sockets A and B
Jumpering for Sockets A and B
Jumpering for Sockets A and B
Interrupt Level Selection
Write enable/protect for devices in sockets E and F
Jumpering for Sockets E and F
Jumpering for Sockets E and F
Jumpering for Sockets E and F
Power fail trip point
Board number, I/O port, Memory window address
Reserved
Flash EPROM programming enable
External backup battery #1 connector
External backup battery #2 connector
*For information regarding the use of the XVME-956/101 as a Solid State Disk, please
refer to the XVME-971 package and manual.
The figure below shows the location of the module's sockets, jumpers, and other features.
Summary of Contents for XVME-976/202
Page 48: ......
Page 50: ...XVME 976 Adapter Module 4 4 2 Figure 4 1 Connector and Jumper Locations...
Page 72: ......
Page 84: ......